Product ID:SC9022522 SYNCORE HC 9823 K40
MSDS Date:09/01/1992
FSC:8040
NIIN:00F045803
MSDS Number: BYMCZ

Emergency Phone: 510-458-8000/202-483-7616

Info Phone: 510-458-8000/202-483-7616

Cage: 33564

Telephone: 202-483-7616

Cage: 33564

EPOXY POLYMER

POLYAMINE

INERT CARRIERS

Fraction By Weight: 30-60%

<10 GM/L (ESTIMATE)

RTECS: 9999999VO

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: UNCURED ADHESIVE MAY IRRITATE.
REPEATED/PROLONGED CONTACT W/UNCURED ADHESIVE MAY RESULT IN
ALLERGIC SENSITIZATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, RASH
Medical Cond Aggravated by Exposure:SKIN SENSITIZATION.

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH THOROUGHLY W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DRINK PLENTY
OF WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Extinguishing Media:DRY CHEMICAL/HALON FIRE EXTINGUISHER, WATER SPRAY,
FOAM/FOG
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING, SUCH AS TURN-OUT GEAR.
Unusual Fire/Explosion Hazard:MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASES.
EXCESSIVE HEATING MAY CAUSE EXOTHERM.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
GLASSES. PICK UP/SHOVEL INTO DOT APPROVED WASTE CONTAINERS.

Handling and Storage Precautions:MAY BE STORED AT 0F FOR UP TO 12
MONTHS. REFRIGERATED STORAGE IS RECOMMENDED TO MAINTAIN PRODUCT
QUALITY.

Respiratory Protection:NOT NECESSARY W/ADEQUATE EXHAUST VENTILATION.IF
DRY SANDING/GRINDING, USE A NIOSH/MSHA APPROVED RESPIRATOR FOR
DUST.
Ventilation:LOCAL EXHAUST AT THE POINT OF USE.
Protective Gloves:BUTYL RUBBER, POLY VINYL CHLORINE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NITRILE RUBBER GLOVES, EYEWASH, SAFETY
SHOWER
Supplemental Safety and Health

Vapor Pres:0
Vapor Density:>1
Spec Gravity:2-2.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID WHITE TO YELLOW TAPE

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS/MINERAL ACIDS
Stability Condition to Avoid:HEATING IN MASSES >1 LB TOTAL. AVOID
HEATING UNLESS CURING SURFACES TO BE BONDED.
Hazardous Decomposition Products:CO, NITROGEN OXIDES, ALDEHYDES, ACIDS
& UNDETERMINED ORGANICS
Conditions to Avoid Polymerization:HEATING IN MASSES >1 LB TOTAL. AVOID
HEATING UNLESS CURING SURFACES TO BE BONDED.

Waste Disposal Methods:INCINERATION IN AN EPA-APPROVED WASTE
INCINERATOR IS A PREFERRED DISPOSAL PRACTICE. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.